Beiträge von bjornb

  • ACC beim A4 8K nachrüsten

    I have now mounted the steering module and the lever part.
    I did also complete the coding for motor, instrument, steering module etc. I went for a test drive and ACC was available and working for a few kilometers before giving a 'ACC not available!' message, with a misadjustment error in the radar module.


    I have not replaced the instrument. Will the non-ACC instrument only give me information in the FIS screen?
    I am aware that the tacho led ring is missing. Is the green/red car indicator led at the top of the instrument missing as well?

  • ACC beim A4 8K nachrüsten

    Zitat von HannesB8


    Hallo,


    alle Codierungen bis auf das STG 13 sind im VCDS dokumentiert. Du musst also nur die richtigen Haken setzen.


    Hi, I hope it is OK if I ask in english, Norwegian Audi driver here :).


    I have a 2010 A4 allroad 2.0 TDI 170hp (CAHA), manual with MMI 3G, B&O, trailer hitch etc.


    I have mounted the ACC radar (module 13), and been to the dealer today and replaced my CAN gateway (from 8T0 907 468 T to 8T0 907 468 AE supporting MOST + extended can), and removing component protection on both gateway and ACC radar.


    I havent replaced my steering wheel module/CC stalk yet but went ahead coding the modules anyway to see what happened.


    I coded the ACC radar (13) with values 61161(dec) = 00EEE9(hex). I am not completely sure yet whether the first decimal should be 4 or 6 (or something else..), my engine is 170hp CR TDI (CAHA).
    I also changed adaptation channel 7 on ACC (13) and it gave me a distance option in MMI.


    My current steering wheel module (16) has part number 8K0 953 568 F, the first post in this thread says I must have 8K0 953 568 G or higher? When I tried to code ACC (setting both CC and ACC bits) I got '31: Request out of range':



    Is there any chance replacing my steering column lever/stalk part to 8K0 953 502 BL to get the ACC switch will remedy this?
    Is steering wheel module (16) 8K0 953 568 G needed for sure?


    Should there be a braking guard menu option as well in the MMI system?
    Currently I only have the ACC option in the CAR menu (MMI 3G). Is braking guard option activated through hidden menu and/or with VCDS?


    Thanks